Bob Greenia, a retired IBMer spends his summers up here at Maple Grove Campground and his son & daughter in law live here in town. Bob has a unique hobby and has offered to build us a miniature Maple Street Covered Bridge. He has sent me a few photos of how he is coming on the project and also provided me with some captions:
(http://www.vtgrandpa.com/photos/albums/minbridge/PA200148.sized.jpg)
Our son Scott had the idea of my building a miniature version of the Maple St. Bridge. We will bring it to Fairfax next summer.
This is the pile of pine lumber that will be used in the construction of the bridge.
(http://www.vtgrandpa.com/photos/albums/minbridge/PA200149.sized.jpg)
Glue-up of one of the lattice sides
(http://www.vtgrandpa.com/photos/albums/minbridge/PA220150.sized.jpg)
Building the base of the bridge. The miniature beams came from Bill Bedell's woods in Georgia
(http://www.vtgrandpa.com/photos/albums/minbridge/PA240151.sized.jpg)
The lattice pieces now have their trunnels installed (in our case, BBQ skewer pieces).
(http://www.vtgrandpa.com/photos/albums/minbridge/PA250152.sized.jpg)
The lattice sides are now installed on the base of the bridge. The entire piece is getting black stain to make it look old.
(http://www.vtgrandpa.com/photos/albums/minbridge/PA250153.sized.jpg)
Top view of the base/side assemblies
(http://www.vtgrandpa.com/photos/albums/minbridge/PA290154.sized.jpg)
Bottom view of bridge showing the bracing and the shoes
(http://www.vtgrandpa.com/photos/albums/minbridge/PA310155.sized.jpg)
Installing the floor of the bridge.
(http://www.vtgrandpa.com/photos/albums/minbridge/PA310156.sized.jpg)
These pieces will become the siding and the roof boards.
(http://www.vtgrandpa.com/photos/albums/minbridge/Pb050157s.sized.jpg)
The cross bracing for the ceiling structure is being installed.
(http://www.vtgrandpa.com/photos/albums/minbridge/Pb050158s.sized.jpg)
This shows the rafter bracing. The bridge is upside down in this picture so the glue can dry.
(http://www.vtgrandpa.com/photos/albums/minbridge/PB060160.sized.jpg)
These are the irons that pull the sides together. There are 6 in all.
(http://www.vtgrandpa.com/photos/albums/minbridge/PB060161.sized.jpg)
This is the start of the rafter installation
(http://www.vtgrandpa.com/photos/albums/minbridge/PB060163.sized.jpg)
The completed rafter install
(http://www.vtgrandpa.com/photos/albums/minbridge/PB070165.sized.jpg)
The roof is all boarded
(http://www.vtgrandpa.com/photos/albums/minbridge/PB090166.sized.jpg)
Both side walls have received their boarding
(http://www.vtgrandpa.com/photos/albums/minbridge/PB090167.sized.jpg)
The first stage of roof covering is to install paper to smooth out the boards.
(http://www.vtgrandpa.com/photos/albums/minbridge/PB090168.sized.jpg)
Both ends are now finished. I will now concentrate on the roof. I am trying to decide on a technique that will make it look like galvanized roofing.
(http://www.vtgrandpa.com/photos/albums/minbridge/PB260191.sized.jpg)
Front view of completed Maple Street bridge model
(http://www.vtgrandpa.com/photos/albums/minbridge/PB260192.sized.jpg)
Side view of completed Maple Street bridge. Will be delivered to Fairfax Next camping season. This was an enjoyable project. It was completed in approximately 40 hours